Ho itšehla thajana letotong la MH3 ke 3kVac le 4.2kVdc, mme bakeng sa lits'ebetso tsa bongaka likarolo li fana ka mekhoa e 'meli ea ts'ireletso ea opareitara (2x MoOP, 250Vac) ho itšehla thajana ho khatiso ea boraro ea IEC60601-1.
Ho na le khetho ea mekhahlelo ea ho kenya, e 'ngoe le e' ngoe e akaretsang karolelano ea 4: 1:
- 4.5V - 18V
- 9V - 36V
- 18V - 76V
Hape ho na le khetho ea tlhahiso e le 'ngoe (MHFS3) le tse peli (MHFW3):
- 3.3V
- 5V
- 9V
- 12V
- +/- 12V
- +/- 15V
Liphetho tse peli li ka sebelisoa letotong ho fana ka 24V kapa 30V.
Likarolo tse le 'ngoe tse hlahisoang li na le likhahla tse ka fokotsoang (ho tloha lehlakoreng la bobeli).
Le likopo tsa bongaka, ts'ebeliso ea indasteri e boneloa pele.
"Ho latela k'hamphani," letoto lena le na le ts'ireletso e matlafalitsoeng 'me sesebelisoa sa eona se etselitsoe ho boloka matla a fapaneng a ka etsahalang ts'ebelisong ea indasteri. " "Kaha o na le boiphihlelo ba ho rala lisebelisoa tsa motlakase bakeng sa lisebelisoa tse sebelisang bakhanni ba IGBT, Cosel o sebelisitse ts'ebetso e ntle ea ho itšehla thajana ho letoto le tlase la MH3 ho fokotsa mokhathala o itšehlang thajana o bakoang ke phapang e phahameng ea motlakase e etsahalang taolong ea makoloi kapa bakhanni ba IGBT." Ho eketsa hore bolelele ba nako ea bophelo bo fanoa bukeng ea likopo tse fumanehang.
Ho paka ke 22 x 12 x 9.5mm (7gram) 8pin single-in-line. Khahlanong le ho tsosoa le ho thothomela, lithakhisa tsa khokahano / tse hoketsoeng li entsoe hore e be sesebelisoa sa epoxy. Ho hlahlojoa ha vibration ke ho 10g (10 - 55Hz, X, Y le Z axis) mme ho hlahlojoa hoa makala ke 50g (hang ho sele e ngoe le e ngoe).
Ts'ebetso e kaholimo ho -40 ho + 85 ° C le 20 - 95% mongobo o lekanyelitsoeng (o sa lumellaneng). Ho ipapisitse le ho phola, 'me ka ho sotla, ts'ebetso e ka ba ho fihlela ho + 105 ° C sebakeng se boletsoeng sa ho lekanya.
Khahlanong le phetisetso ea lerata, matla a fetang lebaka la ho itšehla thajana ke 20pF max "e leng molemo o moholo ha o matlafatsa litsamaiso tsa taolo ea makoloi", ho latela k'hamphani.
Ts'ireletso ea hajoale e hahelletsoe kahare mme pini e hole ha e koetsoe e maemong a tlase (low = on).
Litumello li kenyelletsa: UL62368-1, EN62368-1, c-UL (e lekanang le CAN / CSA-C22.2 No. 62368-1), ANSI / AAMI ES60601-1, EN60601-1 3rd, c-UL (e lekanang le CAN /CSA-C22.2 Nomoro 60601-1).
Taelo ea RoHS e ea lateloa 'me letoto lena le tšoauoa ho latela Low Voltage Directive.
Ho etsa thepa ho Japane, mme waranti ke lilemo tse hlano.
Maqephe a sehlahisoa ke:
Lits'oants'o tse le 'ngoe tsa MHFS
Lihlahisoa tse peli tsa MHFW